- Panic button on key fob install#
- Panic button on key fob code#
- Panic button on key fob plus#
Go to the Scenarios menu and click Create scenario if you are creating a scenario for the rst time, or Add scenario if scenarios have already been created in the security system. Select the Control mode in the Button mode section. Select Button in the list of devices and go to settings by clicking the gear icon. Open the Ajax app and go to the Devices tab. To bind an automation device action to a long or short press of a Button: These pressings can trigger the execution of an action by one or more automation devices: Relay, WallSwitch, or Socket. In the Control mode, the Button has two pressing options: short and long (the button is pressed for more than 3 seconds). To carry the Button on the strap: attach the strap to the Button using the mounting hole in the main body of the Button. To install on at surface (for example, under the table), secure the Button with double-sided adhesive tape. The text of alarm notifications depends on the selected type, as well as the event codes transmitted to the central monitoring station of the security company (CMS).Ĭonsider, that in this mode, pressing the Button will raise an alarm regardless of security mode of the system.Īn alarm if Button is pressed can also run a scenario in the Ajax security system.īutton can be installed on at surface or carried around. You can choose the type of alarm in the device settings. Button support 5 types of alarms: intrusion, fire, medical, gas leak, and panic button. The option is available if Interconnected FireProtect Alarms feature is enabledīutton status is indicated with red or green LED indicators.Īs a panic button, the Button is used to call for security company or help, as well as for emergency notification through the app or sirens.
Mute Interconnected Fire Alarm - when pressed, mutes the fire alarm of FireProtect/FireProtect Plus detectors. Three modes are available:Ĭontrol - controls automation devices by short or long (2 sec) pressing Operating mode Displays the operating mode of the button. Room The choice of the virtual room that the device is assigned to
Settings Parameter Value First field Name of the device, can be changed. 
You can adjust the device parameters in the settings section:
Button Parameter Value Battery Charge Battery level of the device. This must be done manually through the Ajax application.īutton statuses can be viewed in the device menu: Note that after being added to the new hub, the Button is not automatically removed from the device list of the old hub. 
When connected to a new hub, the button Button stops transmitting commands to the old hub. Data is updated only by pressing the Button. Updating the statuses of the device in the list does not depend on the polling time value in the hub settings. The connected button will appear in the list of hub devices in the application. When the Button is added, the LEDs will ash green once.įor detection and pairing, the Button must be located within the hub radio communication zone (on the single protected object).
Click Add and the countdown will begin. Name the device, scan its QR code (located on the package) or enter it manually, select a room and a group (if group mode is enabled). The device is resistant to dust and splashes. You can always keep it on a wrist or a necklace. Please be aware that the presence of any obstructions that impede the signal (for example, walls or oors) will reduce this distance.īutton is easy to carry around. The Button is equipped with protection against accidental press and transmits alarms at a distance of up to 1,300 m from the hub. Relay, WallSwitch or Socket ) to a button press in the Buttonsettings - Scenarios menu. You can bind the action of an automation device ( settings - Scenarios menu. The text of alarm notifications depends on the selected type, as well as the event codes transmitted to the central monitoring station of the security company (CMS). You can choose the type of alarm in the button settings. In panic mode, the Button can act as a panic button and signal about a threat, or inform about an intrusion, as well as are, gas or medical alarm. In Control mode, Button allows you to control Ajax automation devices with a short or long press of a button. The button is a wireless panic button that, when pressed, transmits an alarm to users, as well as to the security company’s CMS.
0 kommentar(er)
